When there are a lot of phones on the farm, the biggest headache is devices that “crash” in the middle of a task. The good news is that most of the time, the cause isn’t some mysterious force-it’s simple things you can check yourself. Let’s take a look at why this happens and how to avoid it.
Why Devices Disconnect
USB isn’t an unlimited channel. With dozens of phones connected to a single computer, power, cables, and hubs become bottlenecks. If there isn’t enough current, the phone disconnects under load. A cheap cable breaks the connection. An overloaded hub loses devices. This is physics, not software.
What to check first
- Use a hub with an external power supply, not a passive one-phones should get enough current;
- High-quality data cables, not “charging” cables;
- Avoid creating long hub-to-hub chains;
- Monitor device temperature and battery charge during prolonged use.
The larger the network, the more important reliability is for the entire setup-power supply, cables, and hubs-rather than the speed of individual components. You can’t skimp on this.
How Lusiesta Helps
Lusiesta displays all devices in a single window, so a disconnected phone is immediately noticeable rather than going unnoticed. You quickly identify the problem and don’t waste hours searching blindly-dozens of devices remain under control.
